| dc.creator |
Mulungu, Deogratias M. M. |
|
| dc.creator |
Ng'ondya, Rejea |
|
| dc.creator |
Mtalo, Felix W. |
|
| dc.date |
2016-03-22T11:48:12Z |
|
| dc.date |
2016-03-22T11:48:12Z |
|
| dc.date |
2007 |
|
| dc.date.accessioned |
2018-04-18T11:50:27Z |
|
| dc.date.available |
2018-04-18T11:50:27Z |
|
| dc.identifier |
Mulungu D., Ng’ondya R., & Mtalo F. (2007).Nyumba ya Mungu reservoir system Simulation by using HEC-ResSim model. Tanzania Journal of engineering and Technology 1 (3) pp 46-57 |
|
| dc.identifier |
1821536X |
|
| dc.identifier |
http://hdl.handle.net/123456789/1211 |
|
| dc.identifier.uri |
http://hdl.handle.net/123456789/10942 |
|
| dc.description |
This research paper focused on estimating effective water and optimization of the NyM reservoir for storage
conservation and hydropower generation. Several models were used in the study: the Rainfall-Runoff model, GFFS was
used to fill in missing data, and the HEC-ResSim Model and the NWBM for reservoir system simulation and water
balance respectively. The effective inflows to the NyM reservoir were determined using HEC-ResSim model and the
NWBM used to check the total water loss in the system. For the reservoir system simulation, the HEC-ResSim model was
used to estimate water loss through irrigation abstractions in Kikuletwa and Ruvu reaches before water enters the NyM
reservoir. The loss was estimated to be 27% of the total inflows at lDDl and lDCl gauging stations upstream the
reservoir. Reservoir evaporation was estimated using pan evaporation data collected from NyM meteorological station.
The effective inflows are important data to the reservoir system simulations for power production. The mean value of
effective water reaching the NyM compared well with the previous study measurement of the d,y season value, which was
done before the dam construction. The HEC-ResSim simulated releases were used to determine the power production at
NyM hydropower plant. Considering water abstractions, the first simulated alternative favored storage conservation in
the reservoir. The power achieved in this alternative was 7% above the TANESCO production (4/.6 GWh/yr). The
second simulated alternative was to maximize power production at NyM hydropower plant. This alternative yielded 13%
above TANESCO production. Despite the high energy attainable in maximization option, the reservoir water levels trend
was seen to draw down drastically. The study also investigated the extent of the impact brought about by the abstracted
water. If irrigation abstractions were restricted from the two reaches then power production would increase by 1/.5
GWh. This increment is about 24% above the power produced when abstraction is allowed in Ruvu and Kikuletwa River
reaches. |
|
| dc.language |
en |
|
| dc.publisher |
College of Engineering and Technology, University of Dar es Salaam |
|
| dc.subject |
firm power, |
|
| dc.subject |
HEC-ResSim model |
|
| dc.subject |
hydroelectric power |
|
| dc.subject |
Nyumba ya Mungu Reservoir |
|
| dc.subject |
reservoir simulation |
|
| dc.subject |
spillage |
|
| dc.subject |
water abstractions |
|
| dc.title |
Nyumba ya Mungu Reservoir System Simulation by Using HEC-ressim Model |
|
| dc.type |
Journal Article, Peer Reviewed |
|