COSTECH Integrated Repository

Designing and development of multiplex rapid diagnostic test platforms for health-related point-of-care applications in the developing world

Show simple item record

dc.creator Seth, Misago
dc.date 2019-06-04T09:22:27Z
dc.date 2019-06-04T09:22:27Z
dc.date 2019-04
dc.date.accessioned 2022-10-25T09:19:45Z
dc.date.available 2022-10-25T09:19:45Z
dc.identifier http://dspace.nm-aist.ac.tz/handle/123456789/296
dc.identifier.uri http://hdl.handle.net/123456789/94907
dc.description A Dissertation Submitted in Partial Fulfilment of the Requirements for the Degree of Doctor of Philosophy in Life Sciences and Bioengineering of the Nelson Mandela African Institution of Science and Technology
dc.description Accurate and timely diagnosis is usually an important step towards appropriate disease management. In resource-limited settings, healthcare workers lack proper facilities to perform vital tests, and the diagnosis of disease is often determined by non-specific, physiological symptoms alone. Simple and rapid tests are needed as pre-requisite tools for patient care and must conform to the criteria set out by the World Health Organization (WHO). Such tests should be affordable, sensitive, specific, user-friendly, robust, equipment-free, and deliverable to the needy, and abbreviated as ASSURED diagnostics. To address the challenge of specific diagnosis for diseases that present with similar symptoms, multiplex diagnostic platforms must be designed. The use of paper has been extensively studied for its potential as matrix for microfluidic devices. In fabrication of multiplexed microfluidic devices, patterning is an important step. Various approaches including cutting, photolithography, wax-printing, plotting and etching have been developed and tested on paper. In recent years, the focus has also been directed towards exploring the potential of hydrophilic threads as a convenient and low-cost approach for fabrication of microfluidic channels and as signal substrate. This research was aimed at designing multiplex diagnostic test platforms that could be used at point-of-care especially in resource-limited settings. The first approach was to design multiplex paper-based platforms where paper was patterned using a combination of cutting and wax-printing. In the second approach, ordinary thread was used to create microfluidic channels and paper discs were used for sample loading, reagent storage and results display to develop a colorimetric test platform that was demonstrated using glucose, uric acid and bovine serum albumin. In the third design, thread was used in combination with nitrocellulose membrane to develop an immunochromatographic test platform for infectious diseases diagnosis and was tested using Helicobacter pylori (bacteria), Hepatitis B surface antigen (viral antigen), and Immunoglobulin G (antibody). Thread-based designs were evaluated for short-term viability under normal storage conditions. All designs produced rapid results with the lowest limit of detection for antigens being as low as 30 ng/ml for immunochromatographic tests. Treatment of hydrophobic threads improved their wicking, with mercerization being the most efficient with wicking rate up to 42 cm/minute. Reagents, including enzymes and antibodies were found to remain viable in dried form on membranes and paper discs. Developing multiplexed paper- and thread-based diagnostic platforms offers a potential approach in developing ASSURED diagnostics to address health challenges in resource-limited settings. Efforts should be directed towards transforming the proposed designs into viable products that can be used at point-of-care.
dc.format application/pdf
dc.language en_US
dc.publisher NM-AIST
dc.subject Point-of-care diagnostics
dc.subject Multiplex devices
dc.subject paper-based diagnostic platforms
dc.subject low-cost diagnostics
dc.subject microfluidic devices
dc.subject infectious diseases
dc.title Designing and development of multiplex rapid diagnostic test platforms for health-related point-of-care applications in the developing world
dc.type Thesis


Files in this item

Files Size Format View
PhD_LiSE_Misago_Seth_2019.pdf 2.231Mb application/pdf View/Open

This item appears in the following Collection(s)

Show simple item record

Search COSTECH


Advanced Search

Browse

My Account